3D Printing
From CAD file to finished part.
Upload an STL or a STEP file and price it yourself in the browser — no email thread, no waiting for a quote. Dispatched in 2-4 working days with a GST invoice.
- File formats
- STL · OBJ · 3MF · STEP
- Build envelope
- 256 × 256 × 256 mm
- Layer height
- 0.12 to 0.28 mm
- Dispatch
- 2-4 working days
Upload your 3D model and price it now.
The geometry is measured on your own machine, so the number appears the moment the file lands. Nothing reaches us until you decide to order.
Measure
Click any two points on the model to read the true distance in millimetres.
Cross-section
Slice through X, Y or Z to check wall thickness and internal cavities.
Fit check
Your part is compared against the build envelope automatically, per axis.
Multi-body
Assemblies load with each body coloured separately, so you see what came through.
Not sure what to upload?
Export your model as an STL from any CAD tool, or send the native STEP file — we read both. Millimetres, please. If the geometry is fragile or thin-walled, tell us in the order note and we’ll orient it for strength.
Printing more than one?
Volume discounts apply automatically as you raise the quantity in the tool. For production runs, recurring batches or a mixed set of files, talk to us and we’ll quote the whole job together.
Four steps, and only one of them is ours.
The quote is instant because the geometry is measured in your browser. Everything after that is a real person checking a real part.
Upload
Drop in an STL, OBJ, 3MF or STEP file up to 100 MB. It renders immediately — nothing is emailed, nothing is queued.
Configure
Choose colour, layer height and infill. The price updates live as you change them, and again as you raise the quantity.
We slice & confirm
Your checkout price is a close estimate from the model’s real volume. We slice the file properly and confirm before printing.
Print & dispatch
Printed, checked and packed. Dispatched in 2-4 working days across India, with a GST invoice for input credit.
Published, so you don’t have to ask.
Guessing at a supplier’s limits wastes everybody’s time. If your part sits outside these, say so and we’ll tell you honestly whether we can help.
Your model is checked against it the moment it loads, and flagged per axis if it is over.
Four tiers, from 0.28 mm draft to 0.12 mm high detail. Thinner layers, smoother surface, longer print.
STEP assemblies are read natively, up to 100 MB. No conversion, no faceting on curves.
No setup fee, no per-order minimum and no file-preparation charge — on a one-off or a batch.
From 10% for display parts up to fully solid, in 5% steps, for load-bearing brackets.
Pan-India, with free shipping above ₹999 and a GST invoice against your GSTIN.
What the machines will and won’t do.
- Process
- FDM, fused deposition modellingMaterial extruded layer by layer from a heated nozzle.
- Build envelope
- 256 × 256 × 256 mmChecked against your model automatically, per axis.
- Layer heights
- 0.28 · 0.20 · 0.16 · 0.12 mmDraft, Standard, Fine and High detail.
- Infill
- 10% to 100%, in 5% steps15 to 20% suits display parts. Load-bearing brackets want 50% or more.
- Material
- PLA, 1.24 g/cm³White, black and grey held in stock. Other polymers on request.
- File formats
- STL · OBJ · 3MF · STEP · STPUp to 100 MB. STEP assemblies are read natively.
- Minimum order
- ₹49 per partNo setup fee, no per-order minimum, no file-preparation charge.
- Dispatch
- 2-4 working daysPan-India. Free shipping on orders above ₹999.
One material done properly, and a door for the rest.
PLA covers the overwhelming majority of enclosures, brackets, jigs and prototypes. We’d rather run one material well than list ten we don’t stock.
PLA
Instant quoteRigid, dimensionally stable and clean-printing. Excellent for enclosures, panels, mounting brackets, jigs, fixtures and visual prototypes. Not for parts that sit in direct sun or near heat — it softens around 60 °C.
- Density
- 1.24 g/cm³
- Layer range
- 0.12 to 0.28 mm
- Colours
PETG · TPU · ABS
On requestNeed chemical resistance, a flexible gasket, or a part that survives a hot car? Tell us the application and the quantity and we’ll quote it directly. These aren’t in the instant quote yet because we only put a material there once we hold it in stock.
The more you print, the less each part costs.
Discounts apply automatically as you raise the quantity in the quote tool. There is nothing to ask for and no code to enter. Set the quantity you need and the price per part comes down on its own.
| Quantity | Price per part |
|---|---|
| 1 to 4 | Standard |
| 5 to 9 | Lower |
| 10 to 24 | Lower still |
| 25 to 49 | Batch rate |
| 50 and above | Talk to us |
Not on the first part, not on a one-off. You pay for the part, not for us opening the file.
Add your GSTIN on the cart page before checkout and claim the input credit.
Applies to 3D-printed parts and components in the same order.
Printed parts and electronics ship together, on one invoice, from one supplier.
Built for the bench you already order from.
Most of our print jobs come from people who bought the electronics in the same cart. That’s the point — the board and the box it lives in, from one supplier, on one invoice.
PCB enclosures
Housings sized to your own board outline, with cut-outs for the connectors you bought here.
Panel-mount brackets
Adapters and faceplates for switches, displays, sensors and DIN-rail assemblies.
Jigs & fixtures
Soldering aids, test beds, drill guides and assembly fixtures for small production runs.
Robotics & drones
Chassis plates, motor mounts, gear housings and arms for competition and lab builds.
Prototype housings
Form-and-fit models before you commit to tooling — printed at 0.12 mm when the finish matters.
Spacers & standoffs
Non-conductive mounts in exactly the height you need, rather than the height that was in stock.
Several files, a repeating batch, or a deadline.
Send the folder and the quantities. We’ll come back with one quote for the whole job, a realistic date, and a plan for repeat batches if this becomes a regular part. Institutions and companies: we invoice with GST and can work against a purchase order.
Before you upload.
Is the price I see at checkout the final price?
Almost always. It is calculated from your model’s real volume and surface area, so it is accurate for typical parts. It is an estimate rather than a slice, so geometry that needs a lot of support material can come out differently. We slice every file before printing and contact you first if the figure changes.
What happens if my part is too big for the printer?
The tool checks your model against the 256 × 256 × 256 mm build envelope the moment it loads and tells you which axis is over. You can scale it down in the tool, or split the part in your CAD software and we’ll print the pieces. For genuinely large parts, message us — sometimes reorienting solves it.
Can I print in something other than PLA?
Yes, by request. PETG, TPU and ABS are all available as quoted jobs — they are not in the instant quote because we only list a material there once we hold it in stock in the colours we promise. Email or WhatsApp with the application and quantity and you’ll get a price the same day.
Which file should I send — STL or STEP?
Either. STL is the universal export and works everywhere. STEP is better if you have it: it carries true geometry rather than a triangle mesh, assemblies stay intact, and there is no faceting on curved surfaces. We read STEP natively, so there is no conversion step and nothing gets lost. OBJ and 3MF work too.
Do I get a GST invoice?
Yes. Enter your GSTIN and company name on the cart page before checkout and the invoice is raised against them, so you can claim the input credit. This works exactly the same way for printed parts as it does for components.
Can I check the model before committing?
That is what the viewer is for. Orbit it, drop a cross-section through any axis to inspect wall thickness and internal cavities, and measure between any two points to confirm a dimension survived export. Multi-body assemblies load with each body in its own colour so you can see immediately if something is missing.
Do you help with the design itself?
Within reason, and gladly. We won’t model a product for you, but if a wall is too thin to survive, a hole will print undersized, or a part would be far stronger printed in another orientation, tell us in the order note and we’ll flag it before it goes on the bed rather than after.
Your file is already good enough to price.
Drag it in and you’ll have a number in seconds. Nothing is charged, nothing is sent, and nobody calls you.