PCB Manufacturing
Drop in a Gerber. Get a price.
Upload your Gerber ZIP and we read it on the spot — layers, outline, board size and area, all detected from the files themselves. Configure the build, watch the price move, and order. Boards dispatched in as little as one day.
- Upload
- Gerber + drill, ZIP
- Detected for you
- Size, layers, area
- Lead time
- 1 to 7 days
- Minimum order
- 5 boards
Upload your Gerber and price it now.
Your archive is opened and measured inside your own browser. Nothing is sent to us until you add the board to your cart.
Reads the files
Layers and outline are identified from the Gerber data, not from the filenames.
Measures the board
Size and area come from your actual outline, and drive the price directly.
Shows both sides
A real 2D render of top and bottom, plus a 3D board preview in your chosen colours.
Prices live
Change quantity, lead time or finish and the quote updates as you watch.
Upload, check, order. That is the whole job.
No quotation email, no waiting for someone to open your files. The analysis is instant because it happens on your machine.
Upload the ZIP
Export Gerber RS-274X plus your Excellon drill files and zip them together. KiCad, Altium, EasyEDA, Eagle and DipTrace naming are all understood.
We read it
Copper layers, board outline, drill data and the true board size are pulled straight out of the files, and anything missing is flagged.
Check the board
Inspect the rendered top and bottom, toggle layers on and off, and see it in 3D in the mask and silkscreen colours you picked.
Order it
Add to cart with the full specification attached. We review every file before it goes to the line and contact you if anything looks wrong.
Your quote is the whole quote.
Upload your board and the tool shows the full breakdown before you commit — manufacturing, setup and GST, itemised. Nothing appears later that you have not already seen.
Flying probe testing is included on every order, never sold as an extra.
A small board costs less than a big one. Your exact price appears the moment your Gerbers are read.
Quantities run in steps of five, and the per-board price falls as the quantity rises.
Add your GSTIN on the cart page before checkout and claim the input credit.
Pick the turnaround you need in the quote tool and the price updates with it.
A person reviews your Gerbers before the board reaches the line, and calls you if something needs a decision.
The options, and the honest limits.
- Layers
- 1 and 2 layerDetected from your copper layers. Boards above 2 layers are quoted manually — talk to us.
- Base material
- FR-4 · FR-1FR-4 glass-epoxy as standard, FR-1 paper-phenolic for single-sided work.
- Board thickness
- 1.6 mm · 1.0 mm1.6 mm is the default and suits almost every design.
- Copper thickness
- 35 µm · 70 µm1 oz as standard, 2 oz where you need the current capacity.
- Solder mask
- Seven colours, or noneGreen, white, red, blue, black, yellow, or bare board.
- Silkscreen
- White · black · nonePrinted from your silkscreen layers where supplied.
- Surface finish
- HASL · Lead-free HASL · Roller tin · Electroplated nickelAll four included at the same rate today.
- File formats
- Gerber RS-274X + Excellon, in a ZIPRAR is not supported yet — please re-zip. Up to 50 MB.
More than two layers, a panel, or a production run.
Four and six layer boards, panelised deliveries, impedance control and assembly are all quoted by hand for now. Send the Gerbers and the quantity and you will get a real number back, not a form letter.
Before you upload.
What exactly should be in the ZIP?
Your Gerber RS-274X files and your Excellon drill files. At minimum we need the copper layers and a board outline (Edge Cuts) — without an outline we cannot measure the board and the quote will not run. Solder mask, silkscreen and paste layers are read if present. Project files, reports and 3D models can stay in the archive; they are ignored.
Do my files get uploaded to your server?
Not while you are quoting. The archive is opened and measured inside your browser, which is why the price appears immediately. Your Gerber archive is only sent to us at the moment you add the board to your cart, so that we can actually manufacture it. It is then stored privately against your order.
How do you know how many layers my board has?
From the copper layers in the archive. Top copper only reads as 1 layer; top and bottom read as 2. Files are judged on their actual content as well as the naming conventions of the major CAD packages, so an Altium export with mechanical-layer outlines and a KiCad folder of identically-named .gbr files are both read correctly.
The detected size looks wrong. Can I change it?
Yes. The size is measured from your board outline, but there is an edit control next to it. If your outline layer contains tooling marks or a frame the measurement can come out larger than the board, so it is worth a glance before you order.
Why is the minimum five boards?
Because the setup work is the same whether we make one board or five, and splitting that across five keeps the per-board price sensible. Quantities run in steps of five from there.
Is GST included in the price I see?
The quote itemises the board cost, the setup charge and 18% GST separately so you can see exactly how the total is built. GST is applied properly at checkout against your GSTIN if you enter one.
Can you do four or six layer boards?
Yes, but not through this page yet. The instant quote covers 1 and 2 layer work. Send multilayer Gerbers to sales@circuitcomps.com with your quantity and lead time and we will price them by hand.
Your Gerbers are already good enough to price.
Drag the ZIP in and you will have a number in seconds. Nothing is charged and nothing is sent until you decide.